GREAT LOOP CRUISE PLANNING
Great Loop Waterway Legs, Distances & Lock Times
Counterclockwise Great Loop Route
Explore the Great Loop by individual cruising leg. Review nautical miles, lock locations, estimated cruising times, and a sample daily itinerary. Then use FloatPlanWizard to build a route tailored to your boat and schedule.
Ready to Plan Your Great Loop?
Use FPW's Trip Planner to build your route, organize daily legs, estimate travel times and fuel, and prepare your float plan.
How to Use the Great Loop Leg List
Step 1 — Explore the legs
Browse the counterclockwise Great Loop leg list. Expand a leg to review its published nautical mileage, lock references, and available planning details.
Step 2 — Explore the cruise timeline
Adjust the available timeline settings to see how cruising duration and lock-delay assumptions affect the estimated schedule.
Step 3 — Build your own route
Open FPW's Trip Planner to create a route using your vessel information, selected stops, and preferred schedule. Review individual route legs and verify mileage before preparing your float plan.
Great Loop Legs and Interactive Cruise Timeline
Review counterclockwise Great Loop legs, published distances, and lock references. Expand individual legs to examine planning details and explore how the estimated cruise timeline changes with the available settings.
68 locks along this route. Estimated lock time: 37 hr 45 min. This allowance includes lockage and typical waiting time. Actual waits vary.
Add This Leg's Stops to Your Waypoints
Save both endpoints of this Great Loop leg to My Waypoints. You can then use them when building your route in FPW's Trip Planner.
CRUISE TIMELINE
Understanding Great Loop Cruising Distances
Charts measure distance in nautical miles (NM), and a speed of one knot covers one nautical mile per hour. Dividing a leg’s NM by your expected cruising speed in knots gives an estimate of time underway.
A published leg gives you a reference distance between stops. Check the channel and approaches you intend to use against current charts. An alternate channel or a fuel stop can add miles. Current, weather and operating restrictions can change how long those miles take.
When you build a route from your waypoints, review each leg’s mileage. If its line skips a bend or takes a different approach, use the mileage override to draw the reviewed path and recalculate the distance.
Planning Lock Delays Along the Great Loop
Two days with the same mileage can finish at different times when one includes several locks. Traffic, lock cycles, operating hours and closures can all affect when your boat gets through.
Expand a leg to see its mapped locks and any published delay estimates. The timeline uses the available lockage and typical wait allowance when grouping legs into days. Change pace or maximum hours per day to see how much cruising fits around that allowance. The lock allowance itself is fixed.
Check the operator’s current information and navigation notices before departure. The guide explains how to budget time for locks.
How to Plan Your Great Loop in FloatPlanWizard
Anyone can explore this directory. Sign in to save stops, build your own route and share a float plan.
- Create or select your vessel profile. Review potential stops in the Great Loop libraries and save the locations you want to My Waypoints.
- Open the Trip Planner, set a starting waypoint and add your next stops in cruising order.
- Review the path and mileage of each leg. If the planned course differs, edit the leg geometry to override its mileage.
- Review daily timing and fuel at your vessel’s expected speed and burn rate. Use the Boat Fuel Calculator to compare fuel assumptions.
- Save your reviewed route, prepare a float plan from it, and share the plan with the shore contacts you’ve selected.
Follow the Great Loop Trip Planning Guide for the full workflow.
Great Loop Planning Questions
How many legs are in the Great Loop directory?
The published directory divides the counterclockwise route into 56 reference legs. A leg connects two named points. Your cruising day may cover part of a leg or several legs.
Does the directory calculate actual travel time?
It estimates cruising hours and groups mileage into planning days using the reference legs, your settings and available lock allowances. Weather, stops and traffic affect your actual arrival.
Are lock waiting times live?
No. The displayed delays are planning allowances. Check with the lock operator for current traffic, hours and restrictions.
Can I create my own Great Loop route?
Yes. Sign in to FPW’s Trip Planner, choose your starting waypoint and add the stops you want. Expanding a directory leg only displays its reference information.
Can I save Great Loop locations as waypoints?
Yes. On a Port, Anchorage, Bridge or Lock detail page with stored waypoint coordinates, sign in and choose Add to My Waypoints. You can then select that location when building a route.
Explore Great Loop Planning Resources
Turn Your Great Loop Research Into a Trip Plan
Use FloatPlanWizard to organize waypoints, build your route, estimate travel times and fuel, and prepare a float plan to share with someone ashore.